I8190XXANC2 Android 4.1.2 Jelly Bean Firmware for
Galaxy S3 Mini (GT-I8190) ATO
Galaxy S3 Mini GT-I8190 အတြက္ Android 4.1.2 Jelly Bean Firmware ကိုတင္ေပးလိုက္ပါတယ္။
အင္စေတာလုပ္နည္းအဆင့္ဆင့္ကိုေအာက္မွာဖတ္ျပီးေသခ်ာလုပ္ေဆာင္သြားပါခင္ဗ်ာ။Firmware Version Info(PDA: I8190XXANC2 CSC: I8190ATOAND2 MODEM: I8190XXANC2 CHANGELIST: 1529413 BUILD DATE: 19.03.2014)
- Download Android 4.1.2 XXANC2 Firmware for Galaxy S3 Mini I8190 from the above list
- Download Odin 3.07
- Switch off your phone and boot Galaxy S3 Mini I8190 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy S3 Mini I8190 to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8190XXANC2_I8190ATOAND2_HOME.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Credit >>>>> နည္းပညာၿမိဳ႕ေတာ္
Rating:
100%
based on 10 ratings.
5 user reviews.
Myanmar Kyat Exchange Rate
0 comments:
Post a Comment